All Products

18
Yes
Detail
Detail
None
1
1000000
Name...
/all-products/

All Products

Detail

Categories:

DMP
DMP Image
Description Flush-mounting dehumidifier for floor installation with very quiet operation, reduced electricity consumption and optimum dehumidification efficiency. Nominal dehumidification capacity 20 l / 24h.
  • Air flow rate: 200 ÷ 380 m³/h
  • R134a refrigerant
SAP
SAP Image

DescriptionFully assembled accumulation-pump unit, to be used in combination with a cooling unit (hydraulic connections carried out by the installer). Can be connected to any chiller.

  • Capacity: 75 ÷ 3500 l
TRA
TRA Image
Description Evaporative cooling tower in fibreglass treated with protection against atmospheric agents. Available in 17 different sizes (standard or low-noise) with an inspection hatch fitted as standard.
  • Cooling capacity: 49.53 ÷ 1084.88 kW
VMF
VMF Image
Description Variable Multi-Flow system of management and control for hydronic systems for air-conditioning, heating and domestic hot water production.
Aernet
Aernet Image
Description Web remote control and monitoring device.
SAF
SAF Image
Description Thermo-accumulators for the production of instant domestic hot water, equipped with energy storage, heat exchanger and adjustment.
  • Capacity: 200 ÷ 500 l
Water Station
Water Station Image
Description Hydronic plug-play kit for hydraulic system regulation. This facilitates the installation of systems that produce cooled water all year, in combination with a water/water chiller and a dry cooler.
FW-R
FW-R Image
Description Water-condensed single-block conditioner for indoor floor installation. Can work in heating mode with an additional water or electric coil.
  • Cooling capacity: 3 ÷ 4.5 kW
  • Heating capacity: 4.35 ÷ 5.2 kW
  • R410A refrigerant
  • Cooling only
  • Rotary compressor
  • Centrifugal fan
  • Floor installation
MEC-W
MEC-W Image
Description Single-block water-condensed unit for indoor installation. Suitable for air-conditioning/heating for small/medium-sized services in commercial and industrial buildings.
  • Cooling capacity: 11 ÷ 55 kW
  • R407C refrigerant
  • Cooling only
  • Scroll compressor
  • Centrifugal fan
  • Plate exchanger
NRL
NRL Image
DescriptionAir/water chiller for outdoor installation. Suitable for summer air-conditioning and the production of hot water for medium-sized services in residential and commercial buildings.
  • Cooling capacity: 53 ÷ 953 kW
  • R410A refrigerant
  • Cooling only
  • Scroll compressor
  • Axial fan
  • Plate exchanger
  • Heat recovery (Option)
  • Pump kit (Option)
  • Water tank (Option)
  • Lownoise version (Option)
  • Network operation (Option)
  • Compatible with ModBus protocol (Option)
  • Compatible with VMF system (Variable Multi Flow) (Option)
  • Internet connection (Option)
  • For two pipes plants
NSG
NSG Image
Description Air/water chiller for outdoor installation. Suitable for air-conditioning and the production of hot water for large-sized services in residential, commercial and industrial buildings.
  • Cooling capacity: 228 ÷ 2100 kW
  • Cooling only
  • Twin screw compressor
  • Axial fan
  • Shell and tube exchanger
  • Heat recovery (Option)
  • Pump kit (Option)
  • Lownoise version (Option)
  • Night mode (Option)
  • Network operation (Option)
  • Compatible with ModBus protocol (Option)
  • Internet connection (Option)
  • For two pipes plants
NSM
NSM Image
DescriptionAir/water chiller for outdoor installation. Suitable for air-conditioning and the production of hot water for large-sized services in residential, commercial and industrial buildings.
  • Cooling capacity: 302 ÷ 2100 kW
  • R134a refrigerant
  • XP10 refrigerant (Option)
  • Cooling only
  • Twin screw compressor
  • Axial fan
  • Shell and tube exchanger
  • Heat recovery (Option)
  • Pump kit (Option)
  • Lownoise version (Option)
  • Night mode (Option)
  • Network operation (Option)
  • Compatible with ModBus protocol (Option)
  • Internet connection (Option)
  • For two pipes plants
NRV
NRV Image
Description Air/water chiller for outdoor installation. Suitable for summer air-conditioning and the production of hot water for medium/large-sized services in residential and commercial buildings.
  • Cooling capacity: 108.1 kW
  • R410A refrigerant
  • Cooling only
  • Scroll compressor
  • Axial fan
  • Plate exchanger
  • Heat recovery (Option)
  • Night mode (Option)
  • Network operation (Option)
  • Compatible with ModBus protocol (Option)
  • For two pipes plants
NRB WITH SHELL AND TUBE EXCHANGER
NRB WITH SHELL AND TUBE EXCHANGER Image
Description Air/water chiller for outdoor installation. Suitable for summer air-conditioning and the production of hot water for medium/large-sized services in residential and commercial buildings.
  • Cooling capacity: 217 ÷ 1047 kW
  • R410A refrigerant
  • Cooling only
  • Scroll compressor
  • Axial fan
  • Shell and tube exchanger
  • Heat recovery (Option)
  • Pump kit (Option)
  • Lownoise version (Option)
  • Night mode (Option)
  • Network operation (Option)
  • Compatible with ModBus protocol (Option)
  • Internet connection (Option)
  • For two pipes plants
NRB WITH PLATE EXCHANGER
NRB WITH PLATE EXCHANGER Image
Description Air/water chiller for outdoor installation. Suitable for summer air-conditioning and the production of hot water for medium/large-sized services in residential and commercial buildings.
  • Cooling capacity: 217 ÷ 1047 kW
  • R410A refrigerant
  • Cooling only
  • Scroll compressor
  • Axial fan
  • Plate exchanger
  • Heat recovery (Option)
  • Pump kit (Option)
  • Water tank (Option)
  • Lownoise version (Option)
  • Night mode (Option)
  • Network operation (Option)
  • Compatible with ModBus protocol (Option)
  • Internet connection (Option)
  • For two pipes plants
ANLI
ANLI Image
Description Reversible inverter air/water heat pump for outdoor installation. Suitable for air-conditioning and heating, and the production of domestic hot water for small/medium services
  • Cooling capacity: 5.88 ÷ 28.77 kW
  • Heating capacity: 6.18 ÷ 31.7 kW
  • R410A refrigerant
  • Cooling and heating
  • DHW
  • Inverter scroll compressor
  • Axial fan
  • Plate exchanger
  • Pump kit (Option)
  • Network operation (Option)
  • Compatible with ModBus protocol (Option)
  • Compatible with VMF system (Variable Multi Flow) (Option)
  • Internet connection (Option)
  • For two pipes plants
CL
CL Image
DescriptionAir/water chiller for indoor installation. Suitable for air-conditioning and the production of hot water for small/medium services in residential and commercial buildings.
  • Cooling capacity: 5.5 ÷ 39.3 kW
  • R410A refrigerant
  • Cooling only
  • Scroll compressor
  • Plug fan
  • Plate exchanger
  • Heat recovery (Option)
  • Pump kit (Option)
  • Water tank (Option)
  • Lownoise version (Option)
  • Network operation (Option)
  • Compatible with ModBus protocol (Option)
  • Compatible with VMF system (Variable Multi Flow) (Option)
  • Internet connection (Option)
  • For two pipes plants
ANL 020
ANL 020 Image
DescriptionAir/water chiller for outdoor installation. Suitable for summer air-conditioning and the production of hot water for small/medium services in residential and commercial buildings
  • Cooling capacity: 5.7 ÷ 43 kW
  • R410A refrigerant
  • Cooling only
  • Scroll compressor
  • Axial fan
  • Plate exchanger
  • Heat recovery (Option)
  • Pump kit (Option)
  • Water tank (Option)
  • Network operation (Option)
  • Compatible with ModBus protocol (Option)
  • Compatible with VMF system (Variable Multi Flow) (Option)
  • Internet connection (Option)
  • For two pipes plants
ANL 290 ÷ 650
ANL 290 ÷ 650 Image
DescriptionAir/water chiller for outdoor installation. Suitable for summer air-conditioning and the production of hot water for small/medium services in residential and commercial buildings
  • Cooling capacity: 54.5 ÷ 132.9 kW
  • R410A refrigerant
  • Cooling only
  • Scroll compressor
  • Axial fan
  • Plate exchanger
  • Heat recovery (Option)
  • Pump kit (Option)
  • Water tank (Option)
  • Lownoise version (Option)
  • Network operation (Option)
  • Compatible with ModBus protocol (Option)
  • Compatible with VMF system (Variable Multi Flow) (Option)
  • Internet connection (Option)
  • For two pipes plants
NLC
NLC Image
DescriptionAir/water chiller for indoor installation. Suitable for air-conditioning and the production of hot water for medium-sized services in residential and commercial buildings.
  • Cooling capacity: 52 ÷ 316 kW
  • R410A refrigerant
  • Cooling only
  • Scroll compressor
  • Plug fan
  • Plate exchanger
  • Heat recovery (Option)
  • Pump kit (Option)
  • Water tank (Option)
  • Lownoise version (Option)
  • Network operation (Option)
  • Compatible with ModBus protocol (Option)
  • Internet connection (Option)
  • For two pipes plants
TBX
TBX Image
DescriptionOil-free air/water chiller for outdoor installation. Suitable for air-conditioning and the production of hot water for large-sized services in residential, commercial and industrial buildings.
  • Cooling capacity: 259 ÷ 861 kW
  • R134a refrigerant
  • Cooling only
  • Centrifugal compressor
  • Axial fan
  • Shell and tube exchanger
  • Lownoise version (Option)
  • Network operation (Option)
  • Compatible with ModBus protocol (Option)
  • For two pipes plants
NSMI
NSMI Image
Description Air-water chiller for external installation with a twin-screw inverter compressor, suitable for large users of air conditioning in buildings for residential, commercial and industrial use.
  • Cooling capacity: 285 ÷ 1201 kW
  • R134a refrigerant
  • XP10 refrigerant (Option)
  • Cooling only
  • Inverter twin screw compressor
  • Axial fan
  • Shell and tube exchanger
  • Heat recovery (Option)
  • Pump kit (Option)
  • Lownoise version (Option)
  • Night mode (Option)
  • Network operation (Option)
  • Compatible with ModBus protocol (Option)
  • Internet connection (Option)
  • For two pipes plants
Energy
Energy Image
Description SPL is an air treatment control unit designed for areas used for wellness, thermal baths, swimming pools, health spas.
  • Air flow rate: 2500 ÷ 25000 m³/h
UFB W
UFB W Image
Description Air treatment unit for floating floors. Post-treatment with water coil.
  • Cooling capacity: 1.5 kW
  • Heating capacity: 2.96 kW
  • Cooling and heating
  • Inverter centrifugal fan
  • Network operation (Option)
  • Compatible with VMF system (Variable Multi Flow) (Option)
  • For two pipes plants
FCZSI
FCZSI Image
DescriptionThe inverter modulation fain coil for sensible air treatment, available in numerous configurations for every installation need: wall, ceiling, recessed, for either hanging installation or in formwork or ducted installation.
  • Cooling capacity: 1.6 ÷ 6.37 kW
  • Heating capacity: 3.7 ÷ 15.52 kW
  • Cooling and heating
  • Floor installation
  • Wall installation
  • Ducted installation
  • Ceiling installation
  • Inverter device
  • Touch control (Option)
  • Network operation (Option)
  • Compatible with VMF system (Variable Multi Flow) (Option)
  • For two pipes plants
  • For four pipes plants
FCZS
FCZS Image
DescriptionFain coil for sensible air treatment, available in numerous configurations for every installation need: wall, ceiling, recessed, for either hanging installation or in formwork or ducted installation.
  • Cooling capacity: 1 ÷ 6.81 kW
  • Heating capacity: 2.4 ÷ 15.52 kW
  • Cooling and heating
  • Floor installation
  • Wall installation
  • Ceiling installation
  • Touch control (Option)
  • Network operation (Option)
  • Compatible with VMF system (Variable Multi Flow) (Option)
  • For two pipes plants
  • For four pipes plants
TUN
TUN Image
DescriptionTUN is a duct-type air-conditioning unit suitable for small/medium-sized applications in the residential, commercial and hotel sectors.
  • Cooling capacity: 4.7 ÷ 33.5 kW
  • Heating capacity: 14.2 ÷ 28.9 kW
  • Cooling and heating
  • Centrifugal fan
  • Ducted installation
  • For two pipes plants
TS
TS Image
DescriptionTUN is a duct-type air-conditioning unit suitable for small/medium-sized applications in the residential, commercial and hotel sectors.
  • Cooling capacity: 4.7 ÷ 33.5 kW
  • Heating capacity: 14.2 ÷ 28.9 kW
  • Cooling and heating
  • Centrifugal fan
  • Ducted installation
  • For two pipes plants
TN
TN Image
DescriptionTN is a machine designed for medium-sized rooms in the commercial and industrial sectors.
  • Cooling capacity: 15.6 ÷ 155.1 kW
  • Heating capacity: 25.2 ÷ 334.1 kW
  • Cooling and heating
  • Centrifugal fan
  • Ducted installation
  • For two pipes plants
TDA
TDA Image
Description TDA is an air-conditioning unit designed for horizontal or vertical installation in the residential, commercial and hotel sectors.
  • Cooling capacity: 4.9 ÷ 22.3 kW
  • Heating capacity: 10.4 ÷ 45.4 kW
TA
TA Image
Description TA is an air-conditioning unit designed for horizontal or vertical installation in the residential, commercial and hotel sectors.
  • Cooling capacity: 4.5 ÷ 40 kW
  • Heating capacity: 14 ÷ 87.5 kW
SPL
SPL Image
Description SPL is an air treatment control unit designed for areas used for wellness, thermal baths, swimming pools, health spas.
  • Air flow rate: 2500 ÷ 25000 m³/h
NCD
NCD Image
Description NCD is an air treatment control unit for use in commercial and industrial systems for large environments.
  • Air flow rate: 900 ÷ 111280 m³/h
FCS
FCS Image
Description Units for sensible air treatment. Floor, ceiling or duct installation.
  • Cooling capacity: 0.9 ÷ 4 kW
  • Heating capacity: 3.6 ÷ 17 kW
  • Cooling and heating
  • Floor installation
  • Ducted installation
  • Ceiling installation
  • For two pipes plants
P
P Image
Description The precision air conditioners of the P series are designed for technological applications requiring high performance and utmost reliability with sensible high thermal load head.
  • Cooling capacity: 7 ÷ 187 kW
  • R410A refrigerant
R
R Image
Description The precision air conditioners of the R series are designed for precision air conditioning of technological spaces with In-Rack installation, offering efficient and localised cooling.
  • Cooling capacity: 20 ÷ 36 kW
  • R410A refrigerant
UFB
UFB Image
Description Booster unit for floating floor installation. Post-treatment with electric resistor.
  • Air flow rate: 140 ÷ 740 m³/h
  • Cooling and heating
  • Inverter centrifugal fan
  • Inverter device
G
G Image
Description The precision air conditioners in the G Series are designed to condition technological premises with precision, for applications with high power density.
  • Cooling capacity: 43 ÷ 183 kW
  • R410A refrigerant
Smuffo
Smuffo Image
Description Portable single-block dehumidifier using R134a gas. The condensation can be drained into the collection basin or directly outside (via the drainage pipe).
  • Air flow rate: 100 ÷ 190 m³/h
  • R134a refrigerant
CSE/CDR/CVA/CGA/CMV
CSE/CDR/CVA/CGA/CMV Image
Description Remote condensers with vertical coils for the largest sizes, or horizontal modular coils for the smaller sizes. Designed for outdoor installation, with materials that guarantee good resistance in all weather conditions.
  • Cooling capacity: 7.7 ÷ 744 kW
WTE/WTR/WDR/WTR/WTA
WTE/WTR/WDR/WTR/WTA Image
Description Liquid coolers with vertical coils for the largest sizes, or horizontal modular coils for the smaller sizes. Designed for outdoor installation, with materials that guarantee good resistance in all weather conditions.
  • Cooling capacity: 3.6 ÷ 166 kW
DJET
DJET Image
Description ON/OFF fan coils with controlled delivery for heating, cooling and dehumidification. Can be installed on 2-pipe or 4-pipe systems and combined with any heat generator.
  • Cooling capacity: 1.5 ÷ 4.1 kW
  • Heating capacity: 3.4 ÷ 8.6 kW
  • Cooling and heating
  • Floor installation
  • Wall installation
  • Network operation
  • Compatible with VMF system (Variable Multi Flow)
  • For two pipes plants
  • For four pipes plants
FCZ
FCZ Image
Description Fain coil available in numerous configurations for every installation need: wall, ceiling, recessed, for either hanging installation or in formwork or ducted installation. A dualjet version is also available.
  • Cooling capacity: 1 ÷ 6.81 kW
  • Heating capacity: 2.4 ÷ 15.52 kW
  • Cooling and heating
  • Floor installation
  • Wall installation
  • Ceiling installation
  • Touch control (Option)
  • Network operation (Option)
  • Compatible with VMF system (Variable Multi Flow) (Option)
  • For two pipes plants
  • For four pipes plants
FCZI
FCZI Image
Description The inverter modulation fain coil available in numerous configurations for every installation need: wall, ceiling, recessed, for either hanging installation or in formwork or ducted installation. A dualjet version is also available.
  • Cooling capacity: 1.6 ÷ 6.37 kW
  • Heating capacity: 3.7 ÷ 15.52 kW
  • Cooling and heating
  • Floor installation
  • Wall installation
  • Ducted installation
  • Ceiling installation
  • Inverter device (Option)
  • Touch control (Option)
  • Network operation (Option)
  • Compatible with VMF system (Variable Multi Flow) (Option)
  • For two pipes plants
  • For four pipes plants
FCXI
FCXI Image
Description The inverter modulation fan coils for heating, cooling and dehumidifying can be installed on 2/4 pipe systems and combined with any heat generator.
  • Cooling capacity: 1.5 ÷ 7.4 kW
  • Heating capacity: 3.4 ÷ 15 kW
  • Cooling and heating
  • Floor installation
  • Wall installation
  • Ducted installation
  • Ceiling installation
  • Inverter device
  • Network operation (Option)
  • Compatible with VMF system (Variable Multi Flow) (Option)
  • For two pipes plants
  • For four pipes plants
ERSR
ERSR Image
Description ERSR is a high-efficiency rotary heat recovery unit for indoor or outdoor installation, with controlled mechanical ventilation.
  • Air flow rate: 1000 ÷ 30000 m³/h
VED
VED Image
DescriptionThe wall/ceiling fan coils for air treatment of ducted systems, either on/off or inverter, for commercial or industrial use, can be matched with any heat generator.
  • Cooling capacity: 0.99 ÷ 18 kW
  • Heating capacity: 4 ÷ 25 kW
  • Cooling and heating
  • Centrifugal fan
  • Ducted installation
  • Network operation (Option)
  • Compatible with VMF system (Variable Multi Flow) (Option)
  • Internet connection (Option)
  • For two pipes plants
  • For four pipes plants
VEC
VEC Image
DescriptionThe suspended ceiling fan coils for air treatment with the Coanda effect, either on/off or inverter, for commercial or industrial use, can be matched with any heat generator.
  • Cooling capacity: 1.32 ÷ 3.6 kW
  • Heating capacity: 1.83 ÷ 4.28 kW
  • Cooling only
  • Centrifugal fan
  • Cassette installation
  • Network operation (Option)
  • Compatible with VMF system (Variable Multi Flow) (Option)
  • For two pipes plants
VENTILCASSAFORMA
VENTILCASSAFORMA Image
Description Flush-mounting wall installation template for fan coils. Available in 2 versions: CHU-L, to be combined with Omnia UL-P fan coils, and CHF for FCX-P, FCX-PV and FCXI-P fan coils.
  • Cooling capacity: 0.84 ÷ 2.83 kW
  • Heating capacity: 2 ÷ 5.94 kW
OUL
OUL Image
DescriptionFan coils for universal installation in the residential sector, for heating, cooling and dehumidification. Can be combined with any heat generator.
  • Cooling capacity: 0.84 ÷ 2.83 kW
  • Heating capacity: 2 ÷ 5.9 kW
  • Cooling and heating
  • Centrifugal fan
  • Floor installation
  • Wall installation
  • Network operation (Option)
  • Compatible with VMF system (Variable Multi Flow) (Option)
  • For two pipes plants
OULI
OULI Image
DescriptionThe inverter modulation fan coils for universal installation in the residential sector, for heating, cooling and dehumidification. Can be combined with any heat generator.
  • Cooling capacity: 1.2 ÷ 2.83 kW
  • Heating capacity: 2.91 ÷ 5.94 kW
  • Cooling and heating
  • Floor installation
  • Wall installation
  • Inverter device (Option)
  • Network operation (Option)
  • Compatible with VMF system (Variable Multi Flow) (Option)
  • For two pipes plants
OHL
OHL Image
DescriptionON/OFF fan coils for universal installation in the residential sector, for heating, cooling and dehumidification. Can be combined with any heat generator.
  • Cooling capacity: 0.84 ÷ 2.83 kW
  • Heating capacity: 2 ÷ 5.9 kW
  • Cooling and heating
  • Centrifugal fan
  • Floor installation
  • Wall installation
  • Network operation
  • Compatible with VMF system (Variable Multi Flow) (Option)
  • For two pipes plants
FHX
FHX Image
DescriptionON/OFF fan coils with a germicidal lamp for heating, cooling and dehumidification. Can be installed on 2-pipe or 4-pipe systems and combined with any heat generator.
  • Cooling capacity: 1.5 ÷ 7.4 kW
  • Heating capacity: 3.4 ÷ 15 kW
  • Cooling and heating
  • Floor installation
  • Wall installation
  • Ceiling installation
  • Network operation (Option)
  • Compatible with VMF system (Variable Multi Flow) (Option)
  • For two pipes plants
FCX
FCX Image
DescriptionThe on/off fan coils for heating, cooling and dehumidifying can be installed on 2/4 pipe systems and combined with any heat generator.
  • Cooling capacity: 1 ÷ 7.6 kW
  • Heating capacity: 2.4 ÷ 17 kW
  • Cooling and heating
  • Floor installation
  • Wall installation
  • Ducted installation
  • Ceiling installation
  • Network operation (Option)
  • Compatible with VMF system (Variable Multi Flow) (Option)
  • For two pipes plants
  • For four pipes plants
FCW
FCW Image
DescriptionFan coils for wall installation. Designed for air treatment in ON/OFF systems in the residential or commercial sector. Can be combined with any heat generator.
  • Cooling capacity: 1.9 ÷ 4 kW
  • Heating capacity: 2.4 ÷ 5.1 kW
  • Cooling and heating
  • Wall installation
  • Network operation (Option)
  • Compatible with VMF system (Variable Multi Flow) (Option)
  • For two pipes plants
FCL & FCLI
FCL & FCLI Image
DescriptionFan coils for cassette installation. Designed for air treatment in ON/OFF systems in the commercial or industrial sector. Can be combined with any heat generator.
  • Cooling capacity: 1.9 ÷ 11 kW
  • Heating capacity: 2.3 ÷ 13 kW
  • Cooling and heating
  • Cassette installation
  • Network operation (Option)
  • Compatible with VMF system (Variable Multi Flow) (Option)
  • For two pipes plants
  • For four pipes plants
VES
VES Image
DescriptionDucted fan coils with inverter-equipped motors for continuous modulation of air flow, suitable for heating, cooling and dehumidifying.
  • Cooling capacity: 1.82 ÷ 11.81 kW
  • Heating capacity: 1.25 ÷ 25.37 kW
  • Cooling and heating
  • Centrifugal fan
  • Ducted installation
  • Network operation (Option)
  • Compatible with VMF system (Variable Multi Flow) (Option)
  • Internet connection (Option)
  • For two pipes plants
  • For four pipes plants
SWP
SWP Image
Description High temperature air-water heat pump for the production of domestic hot water. Version with standard accumulation, or with 1 or 2 coils for combined use with several additional sources.
  • Heating capacity: 2.15 kW
  • R134a refrigerant
HSI
HSI Image
Description Split air-water heat pump for air-conditioning/heating and the production of domestic hot water. Equipped with DC inverter technology, and suitable for small/medium-sized services.
  • Cooling capacity: 9.05 ÷ 15.5 kW
  • Heating capacity: 8.5 ÷ 16 kW
  • R410A refrigerant
  • Cooling and heating
  • DHW
  • Rotary compressor
  • Axial fan
  • Plate exchanger
  • Inverter device
NRK
NRK Image
Description Reversible air/water heat pump for outdoor installation. Suitable for air-conditioning/heating and the production of hot water for medium-sized services in residential and commercial buildings.
  • Cooling capacity: 18 ÷ 148 kW
  • Heating capacity: 21 ÷ 175 kW
  • R410A refrigerant
  • Cooling and heating
  • Scroll compressor
  • Axial fan
  • Plate exchanger
  • Heat recovery (Option)
  • Pump kit (Option)
  • Water tank (Option)
  • Lownoise version (Option)
  • Network operation (Option)
  • Compatible with ModBus protocol (Option)
  • Internet connection
  • For two pipes plants
NRP WITH PLATE EXCHANGER
NRP WITH PLATE EXCHANGER Image
Description Air-water multifunction unit for outdoor installation. Suitable for the simultaneous but independent production of hot and cold water. Available for 2-pipe or 4-pipe systems.
  • Cooling capacity: 43 ÷ 477 kW
  • Heating capacity: 46 ÷ 544 kW
  • R410A refrigerant
  • Multipurpose
  • Scroll compressor
  • Axial fan
  • Plate exchanger
  • Pump kit (Option)
  • Water tank (Option)
  • Lownoise version (Option)
  • Network operation (Option)
  • Compatible with ModBus protocol (Option)
  • Compatible with VMF system (Variable Multi Flow) (Option)
  • Internet connection (Option)
  • For two pipes plants
  • For four pipes plants
NRP WITH SHELL AND TUBE EXCHANGER
NRP WITH SHELL AND TUBE EXCHANGER Image
DescriptionAir-water multifunction unit for outdoor installation. Suitable for the simultaneous but independent production of hot and cold water. Available for 2-pipe or 4-pipe systems.
  • Cooling capacity: 43 ÷ 477 kW
  • Heating capacity: 46 ÷ 544 kW
  • R410A refrigerant
  • Multipurpose
  • Scroll compressor
  • Axial fan
  • Shell and tube exchanger
  • Lownoise version (Option)
  • Network operation (Option)
  • Compatible with ModBus protocol (Option)
  • Compatible with VMF system (Variable Multi Flow) (Option)
  • Internet connection (Option)
  • For four pipes plants
NXP
NXP Image
Description Water-water multifunction unit for indoor installation. Suitable for the simultaneous but independent production of hot and cold water. Available for 2-pipe or 4-pipe systems.
  • Cooling capacity: 109 ÷ 501 kW
  • Heating capacity: 123 ÷ 560 kW
  • R410A refrigerant
  • Multipurpose
  • Scroll compressor
  • Plate exchanger
  • Pump kit (Option)
  • Lownoise version (Option)
  • Network operation (Option)
  • Compatible with ModBus protocol (Option)
  • Compatible with VMF system (Variable Multi Flow) (Option)
  • Internet connection (Option)
  • For two pipes plants
  • For four pipes plants
Repuro
Repuro Image
Description Repuro is a high-efficiency static counter-current heat recovery unit for indoor installation.
  • Air flow rate: 100 ÷ 650 m³/h
RPL
RPL Image
DescriptionRPL is a static heat recovery unit with aluminium plates for horizontal indoor installation.
  • Air flow rate: 300 ÷ 3900 m³/h
URXCF
URXCF Image
Description URX-CF is a heat recovery unit consisting of a static exchanger with aluminium plates and a cooling circuit for heat pump mode. Designed for horizontal indoor installation.
  • Air flow rate: 750 ÷ 3300 m³/h
  • R410A refrigerant
RPLI
RPLI Image
Description RPLI is a inverter modulation static heat recovery unit with aluminium plates for horizontal indoor installation.
  • Air flow rate: 200 ÷ 2300 m³/h
  • Inverter device
RPF
RPF Image
Description RPF is a static heat recovery unit with aluminium plates for horizontal or vertical indoor installation (or outdoor, using the TPRF accessory).
  • Air flow rate: 790 ÷ 4250 m³/h
URHE CF
URHE CF Image
Description URHE-CF is a high-efficiency heat recovery unit consisting of a static exchanger with aluminium plates and a cooling circuit for heat pump mode. Designed for horizontal indoor installation (or outdoor, using the TPE accessory).
  • Air flow rate: 1000 ÷ 3300 m³/h
  • R410A refrigerant
TRS
TRS Image
Description TRS is an enthalpic heat recovery unit: it can exchange sensible and latent energy for horizontal indoor installation.
  • Air flow rate: 100 ÷ 1000 m³/h
MEC-W
MEC-W Image
DescriptionSingle-block water-condensed unit for indoor installation. Suitable for air-conditioning/heating for small/medium-sized services in commercial and industrial buildings.
  • Cooling capacity: 11 ÷ 55 kW
  • R407C refrigerant
  • Cooling only
  • Scroll compressor
  • Centrifugal fan
  • Plate exchanger
RTE
RTE Image
Description Autonomous air-condensed conditioner of the Roof-Top type. Designed for the treatment, filtering and renewal of the air in applications of every size in the service/commercial sector.
  • Cooling capacity: 10 ÷ 254 kW
  • Heating capacity: 11 ÷ 266 kW
  • R410A refrigerant
RTE
RTE Image
DescriptionAutonomous air-condensed conditioner of the Roof-Top type. Designed for the treatment, filtering and renewal of the air in applications of every size in the service/commercial sector.
  • Cooling capacity: 10 ÷ 254 kW
  • Heating capacity: 11 ÷ 266 kW
  • R410A refrigerant
RTX
RTX Image
DescriptionAutonomous air-condensed conditioner of the Roof-Top type. Designed for the treatment, filtering and renewal of the air in applications with average crowding.
  • Cooling capacity: 13 ÷ 305 kW
  • Heating capacity: 13 ÷ 311 kW
  • R410A refrigerant
  • Cooling only
  • Cooling and heating
  • Scroll compressor
  • Plug fan
RTY
RTY Image
Description Autonomous air-condensed conditioner of the Roof-Top type. Designed for the treatment, filtering and renewal of the air in applications with high crowding.
  • Cooling capacity: 30 ÷ 134.8 kW
  • Heating capacity: 29.1 ÷ 142.2 kW
  • R410A refrigerant
LCI
LCI Image
DescriptionMono-split air/air conditioner in heat pump version with DC inverter technology and condensation control device fitted as standard. 3 types of indoor unit: Cassette, Floor-Ceiling, Ducted.
  • Cooling capacity: 3.5 ÷ 16.5 kW
  • Heating capacity: 3.8 ÷ 20 kW
  • R410A refrigerant
  • Cooling only
  • Cooling and heating
  • Inverter rotary compressor
  • Floor installation
  • Ducted installation
  • Ceiling installation
CWX
CWX Image
Description Water condensing unit (CWX) (cooling-only), with indoor unit for wall installation in cooling-only version (EXC, EWP, EWA) with DC inverter technology and PLASMACLUSTER filter.
  • Cooling capacity: 3.5 ÷ 6.7 kW
  • R410A refrigerant
  • Cooling only
  • Cooling and heating
  • Scroll compressor
  • Plate exchanger
  • Wall installation
  • Ducted installation
  • Plasmacluster device
MVAS
MVAS Image
Description Split system with DC inverter technology in heat pump version. Indoor units for duct installation.
  • Cooling capacity: 12.1 ÷ 28 kW
  • Heating capacity: 14 ÷ 30 kW
  • R410A refrigerant
  • Cooling and heating
  • Inverter rotary compressor
  • Ducted installation
MVA
MVA Image
Description VRF system with DC inverter technology in modular heat pump version. Numerous possible combinations of indoor units: Cassette, Floor-Ceiling, Low-head and High-head Ducted, Console, Wall.
  • Cooling capacity: 22.4 ÷ 180 kW
  • Heating capacity: 25 ÷ 200 kW
  • R410A refrigerant
  • Cooling and heating
  • Inverter rotary compressor
  • Floor installation
  • Ducted installation
  • Ceiling installation
CK
CK Image
Description Single-split air conditioner with an indoor unit for floor installation, in the heat pump version with DC inverter technology.
  • Cooling capacity: 2.6 ÷ 5.2 kW
  • Heating capacity: 2.75 ÷ 5.5 kW
  • R410A refrigerant
  • Cooling and heating
  • Inverter rotary compressor
  • Floor installation
COMPACT
COMPACT Image
DescriptionAir conditioner for internal installation without an outdoor unit, in heat pump version with BLDC inverter technology.
  • Cooling capacity: 2.35 kW
  • Heating capacity: 2.36 kW
  • R410A refrigerant
  • Cooling and heating
  • Inverter rotary compressor
  • Floor installation
  • Internet connection
FK
FK Image
Description Single-block air conditioner for window installation in cooling only version.
  • Cooling capacity: 2.7 ÷ 3.6 kW
  • Cooling only
  • Inverter rotary compressor
  • Centrifugal fan
SC
SC Image
Description Mono-split air/air conditioner with indoor column unit in heat pump version with DC inverter technology.
  • Cooling capacity: 12 kW
  • Heating capacity: 13.6 kW
  • R410A refrigerant
  • Cooling and heating
  • Inverter rotary compressor
  • Centrifugal fan
  • Floor installation
SK
SK Image
Description Single-split air conditioner with an indoor unit for wall installation, in the heat pump version with DC inverter technology.
  • Cooling capacity: 2.6 ÷ 7 kW
  • Heating capacity: 3 ÷ 7.3 kW
  • R410A refrigerant
  • Cooling and heating
  • Inverter rotary compressor
  • Wall installation
  • Internet connection
MKM 420 ÷ 1250
MKM 420 ÷ 1250 Image
Description Multi-split air/air system in heat pump version with DC inverter technology. Numerous combinations possible, with 4 types of indoor unit: Cassette, Floor-Ceiling, Ducted, Wall.
  • Cooling capacity: 4.1 ÷ 12.1 kW
  • Heating capacity: 4.4 ÷ 13 kW
  • R410A refrigerant
  • Inverter rotary compressor
SE
SE Image
DescriptionMono-split air/air conditioner with indoor unit for wall installation, in heat pump version with DC inverter technology.
  • Cooling capacity: 2.5 ÷ 6.5 kW
  • Heating capacity: 2.7 ÷ 7 kW
  • R410A refrigerant
  • Cooling and heating
  • Inverter rotary compressor
  • Centrifugal fan
  • Wall installation
Climabox
Climabox Image
Description Climabox is an innovative convective radiator for flush-mounting wall installation, for residential heating. It is designed to meet the needs of modern interior architecture and energy savings.
  • Heating capacity: 1.22 ÷ 2.18 kW
Climafon
Climafon Image
Description CLIMAFON is a system terminal that works on the principle of natural convection: the air is heated by means of an exclusive finned heat exchanger, and introduced into the room via a stack effect.
  • Heating capacity: 0.91 ÷ 2.515 kW
  • Heating only
  • Wall installation
WMG
WMG Image
  • R1234ze refrigerant
DescriptionModular water-water chiller for internal installation with "oil-free" magnetic levitation centrifugal compressors, flooded tube core heat exchanger with a spray system on the plant side and R1234ze refrigerant. Suitable for high use in residential, commercial and industrial buildings.
  • Cooling capacity: 281.8 ÷ 311.8 kW
  • Cooling only
  • Centrifugal compressor
  • Shell and tube exchanger
  • Lownoise version (Option)
  • Network operation (Option)
  • Compatible with ModBus protocol (Option)
  • Internet connection (Option)
  • For two pipes plants
WRL 026 ÷ 161
WRL 026 ÷ 161 Image
DescriptionWater-water chiller for indoor installation. Suitable for air-conditioning for small/medium services in residential and commercial buildings. With the addition of a desuperheater, domestic hot water can also be produced.
  • Cooling capacity: 7 ÷ 43.4 kW
  • R410A refrigerant
  • Cooling only
  • Scroll compressor
  • Plate exchanger
  • Heat recovery (Option)
  • Pump kit (Option)
  • Network operation (Option)
  • Compatible with ModBus protocol (Option)
  • Internet connection (Option)
  • For two pipes plants
HWS
HWS Image
Description Condenserless water chiller for indoor installation. Suitable for cooling only, for medium/large-sized services in residential and commercial buildings.
  • Cooling capacity: 163 ÷ 676 kW
  • R134a refrigerant
  • XP10 refrigerant (Option)
  • Condenserless
  • Twin screw compressor
  • Plate exchanger
  • Heat recovery (Option)
  • Lownoise version (Option)
  • Network operation (Option)
  • Compatible with ModBus protocol (Option)
  • Internet connection (Option)
NXW
NXW Image
DescriptionWater-water chiller for indoor installation. Suitable for medium-sized services in residential and commercial buildings. With the addition of a desuperheater or total recovery system, domestic hot water can also be produced.
  • Cooling capacity: 111 ÷ 510 kW
  • R410A refrigerant
  • Cooling only
  • Scroll compressor
  • Plate exchanger
  • Heat recovery (Option)
  • Pump kit (Option)
  • Lownoise version (Option)
  • Network operation (Option)
  • Compatible with ModBus protocol (Option)
  • Internet connection (Option)
  • For two pipes plants
WS
WS Image
DescriptionWater-water chiller for internal installation with twin-screw compressor, plate heat exchangers and R134a refrigerant. Suitable for high use in residential, commercial and industrial buildings.
  • Cooling capacity: 148 ÷ 699 kW
  • R134a refrigerant
  • XP10 refrigerant (Option)
  • Cooling only
  • Twin screw compressor
  • Plate exchanger
  • Heat recovery (Option)
  • Lownoise version (Option)
  • Network operation (Option)
  • Compatible with ModBus protocol (Option)
  • Internet connection (Option)
WFG
WFG Image
  • R1234ze refrigerant
Description Water-water chiller for indoor installation. Suitable for large-sized services in residential, commercial and industrial buildings. With the addition of a desuperheater or total recovery system, hot water can also be produced.
  • Cooling capacity: 483 ÷ 1726 kW
  • Cooling only
  • Twin screw compressor
  • Shell and tube exchanger
  • Heat recovery (Option)
  • Lownoise version (Option)
  • Network operation (Option)
  • Compatible with ModBus protocol (Option)
  • Internet connection (Option)
TW
TW Image
DescriptionWater-water chiller for indoor installation, with an oil-free magnetic levitation compressor. Suitable for large-sized services in residential, commercial and industrial buildings.
  • Cooling capacity: 285 kW
  • R134a refrigerant
  • Cooling only
  • Centrifugal compressor
  • Plate exchanger
  • For two pipes plants
HWF
HWF Image
DescriptionWater-water chiller for indoor installation. Suitable for large-sized services in residential, commercial and industrial buildings. With the addition of a desuperheater or total recovery system, domestic hot water can also be produced.
  • Cooling capacity: 630 ÷ 1529 kW
  • R134a refrigerant
  • XP10 refrigerant (Option)
  • Cooling only
  • Twin screw compressor
  • Shell and tube exchanger
  • Heat recovery (Option)
  • Lownoise version (Option)
  • Network operation (Option)
  • Compatible with ModBus protocol (Option)
  • Internet connection (Option)
WF
WF Image
DescriptionWater-water chiller for indoor installation. Suitable for large-sized services in residential, commercial and industrial buildings. With the addition of a desuperheater or total recovery system, domestic hot water can also be produced.
  • Cooling capacity: 630 ÷ 2331 kW
  • R134a refrigerant
  • XP10 refrigerant (Option)
  • Cooling only
  • Twin screw compressor
  • Shell and tube exchanger
  • Heat recovery (Option)
  • Lownoise version (Option)
  • Network operation (Option)
  • Compatible with ModBus protocol (Option)
  • Internet connection (Option)
WMX
WMX Image
Description Modular water-water chiller for internal installation with "oil-free" magnetic levitation centrifugal compressors, flooded tube core heat exchanger with a spray system on the plant side and R134a refrigerant. Suitable for high use in residential, commercial and industrial buildings.
  • Cooling capacity: 279.7 ÷ 323.6 kW
  • R134a refrigerant
  • Cooling only
  • Centrifugal compressor
  • Shell and tube exchanger
  • Lownoise version (Option)
  • Network operation (Option)
  • Compatible with ModBus protocol (Option)
  • Internet connection (Option)
  • For two pipes plants
VENICE
VENICE Image
DescriptionWater-water chiller for indoor installation. Suitable for air-conditioning for small services in residential buildings. Fitted with an accumulation tank, water filter and safety valve.
  • Cooling capacity: 6.9 ÷ 9.7 kW
  • R407C refrigerant
  • Cooling only
  • Scroll compressor
  • Plate exchanger
  • For two pipes plants
DMP Image
DMP
Description Flush-mounting dehumidifier for floor installation with very quiet operation, reduced electricity consumption and optimum dehumidification efficiency. Nominal dehumidification capacity 20 l / 24h. Air flow rate: 200 ÷ 380 m³/h R134a refrigerant
SAP Image
SAP
DescriptionFully assembled accumulation-pump unit, to be used in combination with a cooling unit (hydraulic connections carried out by the installer). Can be connected to any chiller. Capacity: 75 ÷ 3500 l
TRA Image
TRA
Description Evaporative cooling tower in fibreglass treated with protection against atmospheric agents. Available in 17 different sizes (standard or low-noise) with an inspection hatch fitted as standard. Cooling capacity: 49.53 ÷ 1084.88 kW
VMF Image
VMF
Description Variable Multi-Flow system of management and control for hydronic systems for air-conditioning, heating and domestic hot water production.
Aernet Image
Aernet
Description Web remote control and monitoring device.
SAF Image
SAF
Description Thermo-accumulators for the production of instant domestic hot water, equipped with energy storage, heat exchanger and adjustment. Capacity: 200 ÷ 500 l
Water Station Image
Water Station
Description Hydronic plug-play kit for hydraulic system regulation. This facilitates the installation of systems that produce cooled water all year, in combination with a water/water chiller and a dry cooler.
FW-R Image
FW-R
Description Water-condensed single-block conditioner for indoor floor installation. Can work in heating mode with an additional water or electric coil. Cooling capacity: 3 ÷ 4.5 kW Heating capacity: 4.35 ÷ 5.2 kW R410A refrigerant Cooling only Rotary compressor Centrifugal fan Floor installation
MEC-W Image
MEC-W
Description Single-block water-condensed unit for indoor installation. Suitable for air-conditioning/heating for small/medium-sized services in commercial and industrial buildings. Cooling capacity: 11 ÷ 55 kW R407C refrigerant Cooling only Scroll compressor Centrifugal fan Plate exchanger
NRL Image
NRL
DescriptionAir/water chiller for outdoor installation. Suitable for summer air-conditioning and the production of hot water for medium-sized services in residential and commercial buildings. Cooling capacity: 53 ÷ 953 kW R410A refrigerant Cooling only Scroll compressor Axial fan Plate exchanger Heat recovery (Option) Pump kit (Option) Water tank (Option) Lownoise version (Option) Network operation (Option) Compatible with ModBus protocol (Option) Compatible with VMF system (Variable Multi Flow) (Option) Internet connection (Option) For two pipes plants
NSG Image
NSG
Description Air/water chiller for outdoor installation. Suitable for air-conditioning and the production of hot water for large-sized services in residential, commercial and industrial buildings. Cooling capacity: 228 ÷ 2100 kW Cooling only Twin screw compressor Axial fan Shell and tube exchanger Heat recovery (Option) Pump kit (Option) Lownoise version (Option) Night mode (Option) Network operation (Option) Compatible with ModBus protocol (Option) Internet connection (Option) For two pipes plants
NSM Image
NSM
DescriptionAir/water chiller for outdoor installation. Suitable for air-conditioning and the production of hot water for large-sized services in residential, commercial and industrial buildings. Cooling capacity: 302 ÷ 2100 kW R134a refrigerant XP10 refrigerant (Option) Cooling only Twin screw compressor Axial fan Shell and tube exchanger Heat recovery (Option) Pump kit (Option) Lownoise version (Option) Night mode (Option) Network operation (Option) Compatible with ModBus protocol (Option) Internet connection (Option) For two pipes plants
NRV Image
NRV
Description Air/water chiller for outdoor installation. Suitable for summer air-conditioning and the production of hot water for medium/large-sized services in residential and commercial buildings. Cooling capacity: 108.1 kW R410A refrigerant Cooling only Scroll compressor Axial fan Plate exchanger Heat recovery (Option) Night mode (Option) Network operation (Option) Compatible with ModBus protocol (Option) For two pipes plants
NRB WITH SHELL AND TUBE EXCHANGER Image
NRB WITH SHELL AND TUBE EXCHANGER
Description Air/water chiller for outdoor installation. Suitable for summer air-conditioning and the production of hot water for medium/large-sized services in residential and commercial buildings. Cooling capacity: 217 ÷ 1047 kW R410A refrigerant Cooling only Scroll compressor Axial fan Shell and tube exchanger Heat recovery (Option) Pump kit (Option) Lownoise version (Option) Night mode (Option) Network operation (Option) Compatible with ModBus protocol (Option) Internet connection (Option) For two pipes plants
NRB WITH PLATE EXCHANGER Image
NRB WITH PLATE EXCHANGER
Description Air/water chiller for outdoor installation. Suitable for summer air-conditioning and the production of hot water for medium/large-sized services in residential and commercial buildings. Cooling capacity: 217 ÷ 1047 kW R410A refrigerant Cooling only Scroll compressor Axial fan Plate exchanger Heat recovery (Option) Pump kit (Option) Water tank (Option) Lownoise version (Option) Night mode (Option) Network operation (Option) Compatible with ModBus protocol (Option) Internet connection (Option) For two pipes plants
ANLI Image
ANLI
Description Reversible inverter air/water heat pump for outdoor installation. Suitable for air-conditioning and heating, and the production of domestic hot water for small/medium services Cooling capacity: 5.88 ÷ 28.77 kW Heating capacity: 6.18 ÷ 31.7 kW R410A refrigerant Cooling and heating DHW Inverter scroll compressor Axial fan Plate exchanger Pump kit (Option) Network operation (Option) Compatible with ModBus protocol (Option) Compatible with VMF system (Variable Multi Flow) (Option) Internet connection (Option) For two pipes plants
CL Image
CL
DescriptionAir/water chiller for indoor installation. Suitable for air-conditioning and the production of hot water for small/medium services in residential and commercial buildings. Cooling capacity: 5.5 ÷ 39.3 kW R410A refrigerant Cooling only Scroll compressor Plug fan Plate exchanger Heat recovery (Option) Pump kit (Option) Water tank (Option) Lownoise version (Option) Network operation (Option) Compatible with ModBus protocol (Option) Compatible with VMF system (Variable Multi Flow) (Option) Internet connection (Option) For two pipes plants
ANL 020 Image
ANL 020
DescriptionAir/water chiller for outdoor installation. Suitable for summer air-conditioning and the production of hot water for small/medium services in residential and commercial buildings Cooling capacity: 5.7 ÷ 43 kW R410A refrigerant Cooling only Scroll compressor Axial fan Plate exchanger Heat recovery (Option) Pump kit (Option) Water tank (Option) Network operation (Option) Compatible with ModBus protocol (Option) Compatible with VMF system (Variable Multi Flow) (Option) Internet connection (Option) For two pipes plants
ANL 290 ÷ 650 Image
ANL 290 ÷ 650
DescriptionAir/water chiller for outdoor installation. Suitable for summer air-conditioning and the production of hot water for small/medium services in residential and commercial buildings Cooling capacity: 54.5 ÷ 132.9 kW R410A refrigerant Cooling only Scroll compressor Axial fan Plate exchanger Heat recovery (Option) Pump kit (Option) Water tank (Option) Lownoise version (Option) Network operation (Option) Compatible with ModBus protocol (Option) Compatible with VMF system (Variable Multi Flow) (Option) Internet connection (Option) For two pipes plants
NLC Image
NLC
DescriptionAir/water chiller for indoor installation. Suitable for air-conditioning and the production of hot water for medium-sized services in residential and commercial buildings. Cooling capacity: 52 ÷ 316 kW R410A refrigerant Cooling only Scroll compressor Plug fan Plate exchanger Heat recovery (Option) Pump kit (Option) Water tank (Option) Lownoise version (Option) Network operation (Option) Compatible with ModBus protocol (Option) Internet connection (Option) For two pipes plants
TBX Image
TBX
DescriptionOil-free air/water chiller for outdoor installation. Suitable for air-conditioning and the production of hot water for large-sized services in residential, commercial and industrial buildings. Cooling capacity: 259 ÷ 861 kW R134a refrigerant Cooling only Centrifugal compressor Axial fan Shell and tube exchanger Lownoise version (Option) Network operation (Option) Compatible with ModBus protocol (Option) For two pipes plants
NSMI Image
NSMI
Description Air-water chiller for external installation with a twin-screw inverter compressor, suitable for large users of air conditioning in buildings for residential, commercial and industrial use. Cooling capacity: 285 ÷ 1201 kW R134a refrigerant XP10 refrigerant (Option) Cooling only Inverter twin screw compressor Axial fan Shell and tube exchanger Heat recovery (Option) Pump kit (Option) Lownoise version (Option) Night mode (Option) Network operation (Option) Compatible with ModBus protocol (Option) Internet connection (Option) For two pipes plants
Energy Image
Energy
Description SPL is an air treatment control unit designed for areas used for wellness, thermal baths, swimming pools, health spas. Air flow rate: 2500 ÷ 25000 m³/h
UFB W Image
UFB W
Description Air treatment unit for floating floors. Post-treatment with water coil. Cooling capacity: 1.5 kW Heating capacity: 2.96 kW Cooling and heating Inverter centrifugal fan Network operation (Option) Compatible with VMF system (Variable Multi Flow) (Option) For two pipes plants
FCZSI Image
FCZSI
DescriptionThe inverter modulation fain coil for sensible air treatment, available in numerous configurations for every installation need: wall, ceiling, recessed, for either hanging installation or in formwork or ducted installation. Cooling capacity: 1.6 ÷ 6.37 kW Heating capacity: 3.7 ÷ 15.52 kW Cooling and heating Floor installation Wall installation Ducted installation Ceiling installation Inverter device Touch control (Option) Network operation (Option) Compatible with VMF system (Variable Multi Flow) (Option) For two pipes plants For four pipes plants
FCZS Image
FCZS
DescriptionFain coil for sensible air treatment, available in numerous configurations for every installation need: wall, ceiling, recessed, for either hanging installation or in formwork or ducted installation. Cooling capacity: 1 ÷ 6.81 kW Heating capacity: 2.4 ÷ 15.52 kW Cooling and heating Floor installation Wall installation Ceiling installation Touch control (Option) Network operation (Option) Compatible with VMF system (Variable Multi Flow) (Option) For two pipes plants For four pipes plants
TUN Image
TUN
DescriptionTUN is a duct-type air-conditioning unit suitable for small/medium-sized applications in the residential, commercial and hotel sectors. Cooling capacity: 4.7 ÷ 33.5 kW Heating capacity: 14.2 ÷ 28.9 kW Cooling and heating Centrifugal fan Ducted installation For two pipes plants
TS Image
TS
DescriptionTUN is a duct-type air-conditioning unit suitable for small/medium-sized applications in the residential, commercial and hotel sectors. Cooling capacity: 4.7 ÷ 33.5 kW Heating capacity: 14.2 ÷ 28.9 kW Cooling and heating Centrifugal fan Ducted installation For two pipes plants
TN Image
TN
DescriptionTN is a machine designed for medium-sized rooms in the commercial and industrial sectors. Cooling capacity: 15.6 ÷ 155.1 kW Heating capacity: 25.2 ÷ 334.1 kW Cooling and heating Centrifugal fan Ducted installation For two pipes plants
TDA Image
TDA
Description TDA is an air-conditioning unit designed for horizontal or vertical installation in the residential, commercial and hotel sectors. Cooling capacity: 4.9 ÷ 22.3 kW Heating capacity: 10.4 ÷ 45.4 kW
TA Image
TA
Description TA is an air-conditioning unit designed for horizontal or vertical installation in the residential, commercial and hotel sectors. Cooling capacity: 4.5 ÷ 40 kW Heating capacity: 14 ÷ 87.5 kW
SPL Image
SPL
Description SPL is an air treatment control unit designed for areas used for wellness, thermal baths, swimming pools, health spas. Air flow rate: 2500 ÷ 25000 m³/h
NCD Image
NCD
Description NCD is an air treatment control unit for use in commercial and industrial systems for large environments. Air flow rate: 900 ÷ 111280 m³/h
FCS Image
FCS
Description Units for sensible air treatment. Floor, ceiling or duct installation. Cooling capacity: 0.9 ÷ 4 kW Heating capacity: 3.6 ÷ 17 kW Cooling and heating Floor installation Ducted installation Ceiling installation For two pipes plants
P Image
P
Description The precision air conditioners of the P series are designed for technological applications requiring high performance and utmost reliability with sensible high thermal load head. Cooling capacity: 7 ÷ 187 kW R410A refrigerant
R Image
R
Description The precision air conditioners of the R series are designed for precision air conditioning of technological spaces with In-Rack installation, offering efficient and localised cooling. Cooling capacity: 20 ÷ 36 kW R410A refrigerant
UFB Image
UFB
Description Booster unit for floating floor installation. Post-treatment with electric resistor. Air flow rate: 140 ÷ 740 m³/h Cooling and heating Inverter centrifugal fan Inverter device
G Image
G
Description The precision air conditioners in the G Series are designed to condition technological premises with precision, for applications with high power density. Cooling capacity: 43 ÷ 183 kW R410A refrigerant
Smuffo Image
Smuffo
Description Portable single-block dehumidifier using R134a gas. The condensation can be drained into the collection basin or directly outside (via the drainage pipe). Air flow rate: 100 ÷ 190 m³/h R134a refrigerant
CSE/CDR/CVA/CGA/CMV Image
CSE/CDR/CVA/CGA/CMV
Description Remote condensers with vertical coils for the largest sizes, or horizontal modular coils for the smaller sizes. Designed for outdoor installation, with materials that guarantee good resistance in all weather conditions. Cooling capacity: 7.7 ÷ 744 kW
WTE/WTR/WDR/WTR/WTA Image
WTE/WTR/WDR/WTR/WTA
Description Liquid coolers with vertical coils for the largest sizes, or horizontal modular coils for the smaller sizes. Designed for outdoor installation, with materials that guarantee good resistance in all weather conditions. Cooling capacity: 3.6 ÷ 166 kW
DJET Image
DJET
Description ON/OFF fan coils with controlled delivery for heating, cooling and dehumidification. Can be installed on 2-pipe or 4-pipe systems and combined with any heat generator. Cooling capacity: 1.5 ÷ 4.1 kW Heating capacity: 3.4 ÷ 8.6 kW Cooling and heating Floor installation Wall installation Network operation Compatible with VMF system (Variable Multi Flow) For two pipes plants For four pipes plants
FCZ Image
FCZ
Description Fain coil available in numerous configurations for every installation need: wall, ceiling, recessed, for either hanging installation or in formwork or ducted installation. A dualjet version is also available. Cooling capacity: 1 ÷ 6.81 kW Heating capacity: 2.4 ÷ 15.52 kW Cooling and heating Floor installation Wall installation Ceiling installation Touch control (Option) Network operation (Option) Compatible with VMF system (Variable Multi Flow) (Option) For two pipes plants For four pipes plants
FCZI Image
FCZI
Description The inverter modulation fain coil available in numerous configurations for every installation need: wall, ceiling, recessed, for either hanging installation or in formwork or ducted installation. A dualjet version is also available. Cooling capacity: 1.6 ÷ 6.37 kW Heating capacity: 3.7 ÷ 15.52 kW Cooling and heating Floor installation Wall installation Ducted installation Ceiling installation Inverter device (Option) Touch control (Option) Network operation (Option) Compatible with VMF system (Variable Multi Flow) (Option) For two pipes plants For four pipes plants
FCXI Image
FCXI
Description The inverter modulation fan coils for heating, cooling and dehumidifying can be installed on 2/4 pipe systems and combined with any heat generator. Cooling capacity: 1.5 ÷ 7.4 kW Heating capacity: 3.4 ÷ 15 kW Cooling and heating Floor installation Wall installation Ducted installation Ceiling installation Inverter device Network operation (Option) Compatible with VMF system (Variable Multi Flow) (Option) For two pipes plants For four pipes plants
ERSR Image
ERSR
Description ERSR is a high-efficiency rotary heat recovery unit for indoor or outdoor installation, with controlled mechanical ventilation. Air flow rate: 1000 ÷ 30000 m³/h
VED Image
VED
DescriptionThe wall/ceiling fan coils for air treatment of ducted systems, either on/off or inverter, for commercial or industrial use, can be matched with any heat generator. Cooling capacity: 0.99 ÷ 18 kW Heating capacity: 4 ÷ 25 kW Cooling and heating Centrifugal fan Ducted installation Network operation (Option) Compatible with VMF system (Variable Multi Flow) (Option) Internet connection (Option) For two pipes plants For four pipes plants
VEC Image
VEC
DescriptionThe suspended ceiling fan coils for air treatment with the Coanda effect, either on/off or inverter, for commercial or industrial use, can be matched with any heat generator. Cooling capacity: 1.32 ÷ 3.6 kW Heating capacity: 1.83 ÷ 4.28 kW Cooling only Centrifugal fan Cassette installation Network operation (Option) Compatible with VMF system (Variable Multi Flow) (Option) For two pipes plants
VENTILCASSAFORMA Image
VENTILCASSAFORMA
Description Flush-mounting wall installation template for fan coils. Available in 2 versions: CHU-L, to be combined with Omnia UL-P fan coils, and CHF for FCX-P, FCX-PV and FCXI-P fan coils. Cooling capacity: 0.84 ÷ 2.83 kW Heating capacity: 2 ÷ 5.94 kW
OUL Image
OUL
DescriptionFan coils for universal installation in the residential sector, for heating, cooling and dehumidification. Can be combined with any heat generator. Cooling capacity: 0.84 ÷ 2.83 kW Heating capacity: 2 ÷ 5.9 kW Cooling and heating Centrifugal fan Floor installation Wall installation Network operation (Option) Compatible with VMF system (Variable Multi Flow) (Option) For two pipes plants
OULI Image
OULI
DescriptionThe inverter modulation fan coils for universal installation in the residential sector, for heating, cooling and dehumidification. Can be combined with any heat generator. Cooling capacity: 1.2 ÷ 2.83 kW Heating capacity: 2.91 ÷ 5.94 kW Cooling and heating Floor installation Wall installation Inverter device (Option) Network operation (Option) Compatible with VMF system (Variable Multi Flow) (Option) For two pipes plants
OHL Image
OHL
DescriptionON/OFF fan coils for universal installation in the residential sector, for heating, cooling and dehumidification. Can be combined with any heat generator. Cooling capacity: 0.84 ÷ 2.83 kW Heating capacity: 2 ÷ 5.9 kW Cooling and heating Centrifugal fan Floor installation Wall installation Network operation Compatible with VMF system (Variable Multi Flow) (Option) For two pipes plants
FHX Image
FHX
DescriptionON/OFF fan coils with a germicidal lamp for heating, cooling and dehumidification. Can be installed on 2-pipe or 4-pipe systems and combined with any heat generator. Cooling capacity: 1.5 ÷ 7.4 kW Heating capacity: 3.4 ÷ 15 kW Cooling and heating Floor installation Wall installation Ceiling installation Network operation (Option) Compatible with VMF system (Variable Multi Flow) (Option) For two pipes plants
FCX Image
FCX
DescriptionThe on/off fan coils for heating, cooling and dehumidifying can be installed on 2/4 pipe systems and combined with any heat generator. Cooling capacity: 1 ÷ 7.6 kW Heating capacity: 2.4 ÷ 17 kW Cooling and heating Floor installation Wall installation Ducted installation Ceiling installation Network operation (Option) Compatible with VMF system (Variable Multi Flow) (Option) For two pipes plants For four pipes plants
FCW Image
FCW
DescriptionFan coils for wall installation. Designed for air treatment in ON/OFF systems in the residential or commercial sector. Can be combined with any heat generator. Cooling capacity: 1.9 ÷ 4 kW Heating capacity: 2.4 ÷ 5.1 kW Cooling and heating Wall installation Network operation (Option) Compatible with VMF system (Variable Multi Flow) (Option) For two pipes plants
FCL & FCLI Image
FCL & FCLI
DescriptionFan coils for cassette installation. Designed for air treatment in ON/OFF systems in the commercial or industrial sector. Can be combined with any heat generator. Cooling capacity: 1.9 ÷ 11 kW Heating capacity: 2.3 ÷ 13 kW Cooling and heating Cassette installation Network operation (Option) Compatible with VMF system (Variable Multi Flow) (Option) For two pipes plants For four pipes plants
VES Image
VES
DescriptionDucted fan coils with inverter-equipped motors for continuous modulation of air flow, suitable for heating, cooling and dehumidifying. Cooling capacity: 1.82 ÷ 11.81 kW Heating capacity: 1.25 ÷ 25.37 kW Cooling and heating Centrifugal fan Ducted installation Network operation (Option) Compatible with VMF system (Variable Multi Flow) (Option) Internet connection (Option) For two pipes plants For four pipes plants
SWP Image
SWP
Description High temperature air-water heat pump for the production of domestic hot water. Version with standard accumulation, or with 1 or 2 coils for combined use with several additional sources. Heating capacity: 2.15 kW R134a refrigerant
HSI Image
HSI
Description Split air-water heat pump for air-conditioning/heating and the production of domestic hot water. Equipped with DC inverter technology, and suitable for small/medium-sized services. Cooling capacity: 9.05 ÷ 15.5 kW Heating capacity: 8.5 ÷ 16 kW R410A refrigerant Cooling and heating DHW Rotary compressor Axial fan Plate exchanger Inverter device
NRK Image
NRK
Description Reversible air/water heat pump for outdoor installation. Suitable for air-conditioning/heating and the production of hot water for medium-sized services in residential and commercial buildings. Cooling capacity: 18 ÷ 148 kW Heating capacity: 21 ÷ 175 kW R410A refrigerant Cooling and heating Scroll compressor Axial fan Plate exchanger Heat recovery (Option) Pump kit (Option) Water tank (Option) Lownoise version (Option) Network operation (Option) Compatible with ModBus protocol (Option) Internet connection For two pipes plants
NRP WITH PLATE EXCHANGER Image
NRP WITH PLATE EXCHANGER
Description Air-water multifunction unit for outdoor installation. Suitable for the simultaneous but independent production of hot and cold water. Available for 2-pipe or 4-pipe systems. Cooling capacity: 43 ÷ 477 kW Heating capacity: 46 ÷ 544 kW R410A refrigerant Multipurpose Scroll compressor Axial fan Plate exchanger Pump kit (Option) Water tank (Option) Lownoise version (Option) Network operation (Option) Compatible with ModBus protocol (Option) Compatible with VMF system (Variable Multi Flow) (Option) Internet connection (Option) For two pipes plants For four pipes plants
NRP WITH SHELL AND TUBE EXCHANGER Image
NRP WITH SHELL AND TUBE EXCHANGER
DescriptionAir-water multifunction unit for outdoor installation. Suitable for the simultaneous but independent production of hot and cold water. Available for 2-pipe or 4-pipe systems. Cooling capacity: 43 ÷ 477 kW Heating capacity: 46 ÷ 544 kW R410A refrigerant Multipurpose Scroll compressor Axial fan Shell and tube exchanger Lownoise version (Option) Network operation (Option) Compatible with ModBus protocol (Option) Compatible with VMF system (Variable Multi Flow) (Option) Internet connection (Option) For four pipes plants
NXP Image
NXP
Description Water-water multifunction unit for indoor installation. Suitable for the simultaneous but independent production of hot and cold water. Available for 2-pipe or 4-pipe systems. Cooling capacity: 109 ÷ 501 kW Heating capacity: 123 ÷ 560 kW R410A refrigerant Multipurpose Scroll compressor Plate exchanger Pump kit (Option) Lownoise version (Option) Network operation (Option) Compatible with ModBus protocol (Option) Compatible with VMF system (Variable Multi Flow) (Option) Internet connection (Option) For two pipes plants For four pipes plants
Repuro Image
Repuro
Description Repuro is a high-efficiency static counter-current heat recovery unit for indoor installation. Air flow rate: 100 ÷ 650 m³/h
RPL Image
RPL
DescriptionRPL is a static heat recovery unit with aluminium plates for horizontal indoor installation. Air flow rate: 300 ÷ 3900 m³/h
URXCF Image
URXCF
Description URX-CF is a heat recovery unit consisting of a static exchanger with aluminium plates and a cooling circuit for heat pump mode. Designed for horizontal indoor installation. Air flow rate: 750 ÷ 3300 m³/h R410A refrigerant
RPLI Image
RPLI
Description RPLI is a inverter modulation static heat recovery unit with aluminium plates for horizontal indoor installation. Air flow rate: 200 ÷ 2300 m³/h Inverter device
RPF Image
RPF
Description RPF is a static heat recovery unit with aluminium plates for horizontal or vertical indoor installation (or outdoor, using the TPRF accessory). Air flow rate: 790 ÷ 4250 m³/h
URHE CF Image
URHE CF
Description URHE-CF is a high-efficiency heat recovery unit consisting of a static exchanger with aluminium plates and a cooling circuit for heat pump mode. Designed for horizontal indoor installation (or outdoor, using the TPE accessory). Air flow rate: 1000 ÷ 3300 m³/h R410A refrigerant
TRS Image
TRS
Description TRS is an enthalpic heat recovery unit: it can exchange sensible and latent energy for horizontal indoor installation. Air flow rate: 100 ÷ 1000 m³/h
MEC-W Image
MEC-W
DescriptionSingle-block water-condensed unit for indoor installation. Suitable for air-conditioning/heating for small/medium-sized services in commercial and industrial buildings. Cooling capacity: 11 ÷ 55 kW R407C refrigerant Cooling only Scroll compressor Centrifugal fan Plate exchanger
RTE Image
RTE
Description Autonomous air-condensed conditioner of the Roof-Top type. Designed for the treatment, filtering and renewal of the air in applications of every size in the service/commercial sector. Cooling capacity: 10 ÷ 254 kW Heating capacity: 11 ÷ 266 kW R410A refrigerant
RTE Image
RTE
DescriptionAutonomous air-condensed conditioner of the Roof-Top type. Designed for the treatment, filtering and renewal of the air in applications of every size in the service/commercial sector. Cooling capacity: 10 ÷ 254 kW Heating capacity: 11 ÷ 266 kW R410A refrigerant
RTX Image
RTX
DescriptionAutonomous air-condensed conditioner of the Roof-Top type. Designed for the treatment, filtering and renewal of the air in applications with average crowding. Cooling capacity: 13 ÷ 305 kW Heating capacity: 13 ÷ 311 kW R410A refrigerant Cooling only Cooling and heating Scroll compressor Plug fan
RTY Image
RTY
Description Autonomous air-condensed conditioner of the Roof-Top type. Designed for the treatment, filtering and renewal of the air in applications with high crowding. Cooling capacity: 30 ÷ 134.8 kW Heating capacity: 29.1 ÷ 142.2 kW R410A refrigerant
LCI Image
LCI
DescriptionMono-split air/air conditioner in heat pump version with DC inverter technology and condensation control device fitted as standard. 3 types of indoor unit: Cassette, Floor-Ceiling, Ducted. Cooling capacity: 3.5 ÷ 16.5 kW Heating capacity: 3.8 ÷ 20 kW R410A refrigerant Cooling only Cooling and heating Inverter rotary compressor Floor installation Ducted installation Ceiling installation
CWX Image
CWX
Description Water condensing unit (CWX) (cooling-only), with indoor unit for wall installation in cooling-only version (EXC, EWP, EWA) with DC inverter technology and PLASMACLUSTER filter. Cooling capacity: 3.5 ÷ 6.7 kW R410A refrigerant Cooling only Cooling and heating Scroll compressor Plate exchanger Wall installation Ducted installation Plasmacluster device
MVAS Image
MVAS
Description Split system with DC inverter technology in heat pump version. Indoor units for duct installation. Cooling capacity: 12.1 ÷ 28 kW Heating capacity: 14 ÷ 30 kW R410A refrigerant Cooling and heating Inverter rotary compressor Ducted installation
MVA Image
MVA
Description VRF system with DC inverter technology in modular heat pump version. Numerous possible combinations of indoor units: Cassette, Floor-Ceiling, Low-head and High-head Ducted, Console, Wall. Cooling capacity: 22.4 ÷ 180 kW Heating capacity: 25 ÷ 200 kW R410A refrigerant Cooling and heating Inverter rotary compressor Floor installation Ducted installation Ceiling installation
CK Image
CK
Description Single-split air conditioner with an indoor unit for floor installation, in the heat pump version with DC inverter technology. Cooling capacity: 2.6 ÷ 5.2 kW Heating capacity: 2.75 ÷ 5.5 kW R410A refrigerant Cooling and heating Inverter rotary compressor Floor installation
COMPACT Image
COMPACT
DescriptionAir conditioner for internal installation without an outdoor unit, in heat pump version with BLDC inverter technology. Cooling capacity: 2.35 kW Heating capacity: 2.36 kW R410A refrigerant Cooling and heating Inverter rotary compressor Floor installation Internet connection
FK Image
FK
Description Single-block air conditioner for window installation in cooling only version. Cooling capacity: 2.7 ÷ 3.6 kW Cooling only Inverter rotary compressor Centrifugal fan
SC Image
SC
Description Mono-split air/air conditioner with indoor column unit in heat pump version with DC inverter technology. Cooling capacity: 12 kW Heating capacity: 13.6 kW R410A refrigerant Cooling and heating Inverter rotary compressor Centrifugal fan Floor installation
SK Image
SK
Description Single-split air conditioner with an indoor unit for wall installation, in the heat pump version with DC inverter technology. Cooling capacity: 2.6 ÷ 7 kW Heating capacity: 3 ÷ 7.3 kW R410A refrigerant Cooling and heating Inverter rotary compressor Wall installation Internet connection
MKM 420 ÷ 1250 Image
MKM 420 ÷ 1250
Description Multi-split air/air system in heat pump version with DC inverter technology. Numerous combinations possible, with 4 types of indoor unit: Cassette, Floor-Ceiling, Ducted, Wall. Cooling capacity: 4.1 ÷ 12.1 kW Heating capacity: 4.4 ÷ 13 kW R410A refrigerant Inverter rotary compressor
SE Image
SE
DescriptionMono-split air/air conditioner with indoor unit for wall installation, in heat pump version with DC inverter technology. Cooling capacity: 2.5 ÷ 6.5 kW Heating capacity: 2.7 ÷ 7 kW R410A refrigerant Cooling and heating Inverter rotary compressor Centrifugal fan Wall installation
Climabox Image
Climabox
Description Climabox is an innovative convective radiator for flush-mounting wall installation, for residential heating. It is designed to meet the needs of modern interior architecture and energy savings. Heating capacity: 1.22 ÷ 2.18 kW
Climafon Image
Climafon
Description CLIMAFON is a system terminal that works on the principle of natural convection: the air is heated by means of an exclusive finned heat exchanger, and introduced into the room via a stack effect. Heating capacity: 0.91 ÷ 2.515 kW Heating only Wall installation
WMG Image
WMG
R1234ze refrigerant DescriptionModular water-water chiller for internal installation with "oil-free" magnetic levitation centrifugal compressors, flooded tube core heat exchanger with a spray system on the plant side and R1234ze refrigerant. Suitable for high use in residential, commercial and industrial buildings. Cooling capacity: 281.8 ÷ 311.8 kW Cooling only Centrifugal compressor Shell and tube exchanger Lownoise version (Option) Network operation (Option) Compatible with ModBus protocol (Option) Internet connection (Option) For two pipes plants
WRL 026 ÷ 161 Image
WRL 026 ÷ 161
DescriptionWater-water chiller for indoor installation. Suitable for air-conditioning for small/medium services in residential and commercial buildings. With the addition of a desuperheater, domestic hot water can also be produced. Cooling capacity: 7 ÷ 43.4 kW R410A refrigerant Cooling only Scroll compressor Plate exchanger Heat recovery (Option) Pump kit (Option) Network operation (Option) Compatible with ModBus protocol (Option) Internet connection (Option) For two pipes plants
HWS Image
HWS
Description Condenserless water chiller for indoor installation. Suitable for cooling only, for medium/large-sized services in residential and commercial buildings. Cooling capacity: 163 ÷ 676 kW R134a refrigerant XP10 refrigerant (Option) Condenserless Twin screw compressor Plate exchanger Heat recovery (Option) Lownoise version (Option) Network operation (Option) Compatible with ModBus protocol (Option) Internet connection (Option)
NXW Image
NXW
DescriptionWater-water chiller for indoor installation. Suitable for medium-sized services in residential and commercial buildings. With the addition of a desuperheater or total recovery system, domestic hot water can also be produced. Cooling capacity: 111 ÷ 510 kW R410A refrigerant Cooling only Scroll compressor Plate exchanger Heat recovery (Option) Pump kit (Option) Lownoise version (Option) Network operation (Option) Compatible with ModBus protocol (Option) Internet connection (Option) For two pipes plants
WS Image
WS
DescriptionWater-water chiller for internal installation with twin-screw compressor, plate heat exchangers and R134a refrigerant. Suitable for high use in residential, commercial and industrial buildings. Cooling capacity: 148 ÷ 699 kW R134a refrigerant XP10 refrigerant (Option) Cooling only Twin screw compressor Plate exchanger Heat recovery (Option) Lownoise version (Option) Network operation (Option) Compatible with ModBus protocol (Option) Internet connection (Option)
WFG Image
WFG
R1234ze refrigerant Description Water-water chiller for indoor installation. Suitable for large-sized services in residential, commercial and industrial buildings. With the addition of a desuperheater or total recovery system, hot water can also be produced. Cooling capacity: 483 ÷ 1726 kW Cooling only Twin screw compressor Shell and tube exchanger Heat recovery (Option) Lownoise version (Option) Network operation (Option) Compatible with ModBus protocol (Option) Internet connection (Option)
TW Image
TW
DescriptionWater-water chiller for indoor installation, with an oil-free magnetic levitation compressor. Suitable for large-sized services in residential, commercial and industrial buildings. Cooling capacity: 285 kW R134a refrigerant Cooling only Centrifugal compressor Plate exchanger For two pipes plants
HWF Image
HWF
DescriptionWater-water chiller for indoor installation. Suitable for large-sized services in residential, commercial and industrial buildings. With the addition of a desuperheater or total recovery system, domestic hot water can also be produced. Cooling capacity: 630 ÷ 1529 kW R134a refrigerant XP10 refrigerant (Option) Cooling only Twin screw compressor Shell and tube exchanger Heat recovery (Option) Lownoise version (Option) Network operation (Option) Compatible with ModBus protocol (Option) Internet connection (Option)
WF Image
WF
DescriptionWater-water chiller for indoor installation. Suitable for large-sized services in residential, commercial and industrial buildings. With the addition of a desuperheater or total recovery system, domestic hot water can also be produced. Cooling capacity: 630 ÷ 2331 kW R134a refrigerant XP10 refrigerant (Option) Cooling only Twin screw compressor Shell and tube exchanger Heat recovery (Option) Lownoise version (Option) Network operation (Option) Compatible with ModBus protocol (Option) Internet connection (Option)
WMX Image
WMX
Description Modular water-water chiller for internal installation with "oil-free" magnetic levitation centrifugal compressors, flooded tube core heat exchanger with a spray system on the plant side and R134a refrigerant. Suitable for high use in residential, commercial and industrial buildings. Cooling capacity: 279.7 ÷ 323.6 kW R134a refrigerant Cooling only Centrifugal compressor Shell and tube exchanger Lownoise version (Option) Network operation (Option) Compatible with ModBus protocol (Option) Internet connection (Option) For two pipes plants
VENICE Image
VENICE
DescriptionWater-water chiller for indoor installation. Suitable for air-conditioning for small services in residential buildings. Fitted with an accumulation tank, water filter and safety valve. Cooling capacity: 6.9 ÷ 9.7 kW R407C refrigerant Cooling only Scroll compressor Plate exchanger For two pipes plants

Comments are closed